Capacitance Pressure Transducers
-
Submersible and General Purpose Models
-
Stainless Steel Case Construction
-
High Proof Pressures
-
Open Faced for Viscous Liquids
|
-
Sensing Ranges From Vacuum to 10,000 psi (689 bar)
-
Rugged Stainless Steel & Valox® Housings
-
Ideal for High Shock & Vibration Applications
|
-
Standard Torr, kPa and mbar Vacuum Ranges
-
Wide Compensated Operating Temperature
-
Protected Against Miss-wiring
|
-
Liquid Media on Both Ports
-
Bleed Screws for Accurate Results
-
Optional Manifold for Easy Installation
|
-
0-2 to 0-10,000 psi Pressure Ranges (0-690 bar)
-
Voltage or Current Output
-
NEMA 4/IP65 with Zero and Span Adjustments
|
-
For Air or Non-Conductive Gas
-
0.25 to 100 Inches (6.35 to 2540 mm) in W.C. (differential)/±0.1 to ±50 Inches in W.C. (bidirectional)
-
High Proof Pressure
|
-
Instant Warm-Up
-
Barometric Pressure: 600 to 1100 or 800 to 1100 hPa/mb
-
Low Power Consumption
|
-
For Clean-In-Place (CIP) and Sterilize-In-Place (SIP)
-
0.20% Full Scale Accuracy
-
No Liquid Fill Diaphragms
|
1200/1600 Series Pressure Transducers
-
Voltage and Current Output
-
Gauge, Vacuum, and Compound Pressure
-
General Purpose and Wash Down Enclosures
OEM Pressure Transducers Featuring Exceptional Proof Pressure and Stability Specifications
The 1200 series pressure sensor features stability and toughness via its CVD and ASIC design coupled with a thicker diaphragm. The thicker diaphragm enables these pressure transducer sensors to survive most pressure spikes caused by pump ripple, solenoid valves, etc. The 1600 series extends the packaging options by providing an all welded stainless steel back end for demanding industrial applications. A modular design allows special ordering of fittings, electrical cables, etc. for OEM applications. The ASIC and CVD technology enables Gems™ to offer almost any output over any pressure range.
Applications:
-
Off-Highway Vehicles
-
Natural Gas Equipment
-
Semiconductor Processing
-
Power Plants
-
Refrigeration
-
Robotics
-
HVAC
-
2200/2600 Series Pressure Transducers
-
Millivolt, Voltage and Current Output
-
Gauge, Absolute, Vacuum and Compound Pressure
-
Submersible, General Purpose and Wash Down Enclosures
General Purpose Industrial Pressure Transducers
The 2200 series pressure transducer features stability and accuracy in a variety of enclosure options. The 2600 extends the packaging options via an all welded stainless steel back end for demanding submersible and industrial applications. The 2200 and the 2600 pressure transducers feature proven CVD sensing technology, an ASIC (amplified units), and modular packaging to provide a sensor line that can easily accommodate specials while not sacrificing high performance.
Applications:
-
Off-Highway Vehicles
-
Natural Gas Equipment
-
Semiconductor Processing
-
Power Plants
-
Refrigeration
-
Robotics
-
HVAC
3300 Series Pressure Transducer
-
0 to 600 psig (0 to 41 bar) Pressure Ranges
-
Choice of Outputs, Electrical Connections and Pressure Ports
-
Operating Temperature to 257°F (125°C)
For OEMs who need consistent high levels of performance, reliability and stability the 3300 Series pressure sensor offers a small package size with all stainless wetted parts at an unbeatable price/performance ratio. A wide choice of electrical outputs as well as both electrical and pressure connections means the unit is suitable for most applications without modification. The compact construction of the 3300 series makes it ideal for installation where space is at a premium.
6700 Series Pressure Transducer
-
Gauge and Absolute Pressure
-
Submersible, General Purpose and Wash Down Enclosures
The 6700 series pressure sensors features customer accessible 5:1 turndown via a switch and potentiometer. Down ranging whether factory or user adjusted is ideal for applications requiring high overpressure. The 6700 is housed in a rugged enclosure for harsh conditions and features superb stability by incorporating Gems'™ CVD sensing element.
Applications:
-
Off Highway Vehicles
-
Natural Gas Equipment
-
Semiconductor Processing
-
Power Plants
-
Refrigeration
-
HVAC
-
3100 / 3200 Series Pressure Transducers
-
0-75 psi to 0-30,000 psi ranges (5 bar to 0-2,200 bar)
-
High Proof Pressures
-
Broad Choice of Outputs
-
RoHS Compliant
For OEMs that need consistent high levels of performance, reliability and stability the 3100 and 3200 series sputtered thin film pressure transducer unit offers an unbeatable price/performance ratio in a small package size. It features all-stainless steel wetted parts, a broad selection of electrical and pressure connections, and a wide choice of electrical outputs to allow stock configurations suitable for most applications without modification. At the heart of this series is a sputter element that also provides exceptional temperature specifications. The manufacturing process for the 3100 series includes the latest automated equipment, producing the most consistent and best price to performance sensor on the market today.
Additionally, 3200 series transmitters feature thicker diaphragms and a pressure restrictor to withstand the rigors of cavitations or extreme pressure spikes, delivering years of reliable and stable performance in pulsating applications.
The compact construction of this series makes it ideal for installation where space is at a premium. And it is fully RoHS compliant.
4000 Series Pressure Transducer
-
Millivolt Output
-
Gauge, Sealed, Absolute, and Differential Pressure Models Available
-
Submersible, Waterproof and High Temperature Enclosures
The 4000 series pressure sensor provides exceptional levels of stability and other performance specifications in a wide variety of enclosures from submersible to differential styles. By using a sputtered sensing element, which achieves a molecular fusion of a strain gauge material, an insulating material, and the 17-4 PH ss sensing element, the 4000 series transmitter provides the most stable sensor construction possible. These sputtered sensors are packaged for harsh applications requiring long term submersible service where precise laboratory type measurements are required.
Also in the 4000 series pressure transmitter is a range of high performance amplified sensors with voltage and current outputs. These laboratory specification sensors utilize the same thin film sensor as 4000.
Applications:
-
Off Highway Vehicles
-
Natural Gas Equipment
-
Semiconductor Processing
-
Power Plants
-
Refrigeration
-
Robotics
-
HVAC
4700 Series Pressure Transducer
-
Current Output
-
Gauge, Sealed and Absolute Models
-
Submersible, General Purpose and Wash Down Enclosures
-
Intrinsically Safe Models
The 4700 series pressure sensor provides precise laboratory type measurements in a rugged industrial package complete with turndown capabilities. Exceptional levels of stability and other performance specifications are achieved by using a sputtered sensing element, which achieves a molecular fusion of a strain gauge material, an insulating material, and the 17-4 PH ss sensing element. Sputtered or thin film technology provides years of worry free measurements under demanding real world conditions.
Applications:
-
Off Highway Vehicles
-
Natural Gas Equipment
-
Semiconductor Processing
-
Power Plants
-
Refrigeration
-
Robotics
-
HVAC
-
Ultrasonic Level Switches
Gems™ ULS Series of ultrasonic switches are designed for a broad spectrum of viscous to light liquids; including some of the most challenging liquids you may deal with: acids, freon, paints, lacquers, etc. Stainless steel units are built to withstand high temperatures and pressures with welded stainless steel sensor probes that have no seals to leak and no moving parts to wear out. ULS Series switches are unaffected by variation in temperature, pressure, density or type of liquid. ULS-10 and ULS-100 electronics are housed in cast aluminum, NEMA 4/NEMA 7 explosion proof and water tight enclosures.
-
Ultrasonic Switches Monitor the Toughest Applications
-
Handles Pressures to 1000 psi (69 bar)
-
Unaffected by Foam, Vapors, Particulate or Turbulences
-
Lengths to 121 inches (3073 mm)
-
Can be Side, Top or Bottom Mounted
-
Easy to Install - Simple to Use
ULS-1 Series Ultrasonic Level Switch
-
Compact 1/4" and 1/2" NPT
-
All-Stainless Steel
-
IP68 Construction for Tanks or Sumps
The ULS-1 Series has proven ultrasonic technology combined with micro-controller improved performance in aerated liquid for tight spaces.
The ULS-1 Series Ultrasonic Level Switches are low cost, compact, level sensors with no moving parts, these small units are ideal for a variety of point level sensing applications especially where dependability and economy are a must.
These level switch units are suitable for high, low or intermediate level detection in practically any tank, large or small.
Applications:
-
Medical/Laboratory Equipment
-
Pump Protection
-
Storage Tanks
-
Compressors
-
Hydraulic Supply Lines
-
Oil Film Detection
-
Coolant Reservoirs
-
Boiler Water Cutoff
-
Hydraulic & Lube Reservoirs
-
Chillers
ULS-11 Series Ultrasonic Level Switch
-
1 Amp SPST Relay Output
-
9 to 36 VDC Input
-
Temperatures to 160°F (71.1°C)
-
Lengths to 99 Inches (2515 mm)
By integrating a 1 amp relay into the stem, we've made the ULS-11 our most compact ultrasonic unit. Yet, as unobtrusive as it is, the ULS-11 still delivers ultra-reliable solid-state performance in lengths up to 99 inches (2515 mm). Tip gap probe configuration places sensing point at 1/4 inch (6 mm) from probe tip for closer tank bottom sensing. Electronics are completely epoxy sealed for years of maintenance free service.
Gems™ ULS Series of ultrasonic switches are designed for a broad spectrum of viscous to light liquids; including some of the most challenging liquids you may deal with: acids, freon, paints lacquers, etc. They're built to withstand high temperatures and pressures with welded stainless steel sensor probes that have no seals to leak and no moving parts to wear out. ULS Series switches are unaffected by variation in temperature, pressure, density or type of liquid. In most cases, electronics are housed in cast aluminum, NEMA 4/NEMA 7 explosion proof and watertight enclosures.
Plastic Electro-Optic Level Switches
-
Smallest Size
-
TPE Over-Molded Electronics
-
Durable Enough to Handle Harsh Environments
|
-
General Purpose
-
Variety of Mountings
-
Economically Priced
|
-
Flange Mounting
-
No Threads Needed
-
Ideal for Thin Wall Tanks
|
-
Temperatures to 212°F
-
HTS Version - 1/2" Long
-
UL Approved
|
-
Teflon® Body and Prism
-
Ideal for Ultra-High Purity Applications
-
Chemically Resistant
|
|